Коммутаторы : Коммутаторы Cisco Catalyst серии 3750. 3750 #archive download -sw /leave-old-sw tftp://11.11.11.11/ c3750 -i5-tar.122-20.SE.tar Loading.
Коммутаторы Cisco Catalyst 3750 поддерживают различные функции обеспечения качества обслуживания, например классификацию, маркирование.
Скачать его можно отсюда www.nsclient.org/nscp/downloads. Есть как 32- разрядная, так Настройка Nagios для мониторинга CISCO (2960 и 3750). Для начала нам Или следует проверять конфиг Cisco. Итак, мы.
«Что нужно настроить на Cisco Catalyst с нуля?» или встречается запрос в google: « Скачать дефолтовый конфиг для Cisco Catalyst».
Working with the Cisco IOS File System, Configuration Files, and Software Images Working with the Cisco IOS File System, Configuration Files, and Software Images This appendix describes how to manipulate the Catalyst 3750-X or 3560-X switch flash file system, how to copy configuration files, and how to archive (upload and download) software images to a Catalyst 3750-X or 3560-X switch or to a Catalyst 3750-X switch stack. Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack. Note For complete syntax and usage information for the commands used in this chapter, see the switch command reference for this release and the Cisco IOS Configuration Fundamentals Command Reference, Release 12.2. Working with the Flash File System Working with Configuration Files Working with Software Images Working with the Flash File System The flash file system is a single flash device on which you can store files. It also provides several commands to help you manage software image and configuration files. The default flash file system on the switch is named flash: . As viewed from the stack master, or any stack member, flash: refers to the local flash device, which is the device attached to the same switch on which the file system is being viewed. In a switch stack, each of the flash devices from the various stack members can be viewed from the stack master. The names of these flash file systems include the corresponding switch member numbers. For example, flash3: , as viewed from the stack master, refers to the same file system as does flash: on stack member 3. Use the show file systems privileged EXEC command to list all file systems, including the flash file systems in the switch stack. No more than one user at a time can manage the software images and configuration files for a switch stack. These sections contain this configuration information: Working with Configuration Files This section describes how to create, load, and maintain configuration files. Note For information about configuration files in switch stacks, see the “Switch Stack Configuration Files” section. Configuration files contain commands entered to customize the function of the Cisco IOS software. A way to create a basic configuration file is to use the setup program or to enter the setup privileged EXEC command. For more information, see Chapter3, “Assigning the Switch IP Address and Default Gateway” You can copy ( download ) configuration files from a TFTP, FTP, or RCP server to the running configuration or startup configuration of the switch. You might want to perform this for one of these reasons:
Решение: 1. cisco > enable 2. cisco # clock set 17:10:00 3. cisco # configure. 7. cisco (config)# username user privilege 15 password 7 Pa$$w0rd. Cisco 3750x при включении не доходит до CLI, кто нибудь.
Preparing to Download or Upload a Configuration File By Using TFTP This appendix describes how to manipulate the Catalyst 3750 -X or 3560-X switch flash.
Ключевые слова: cisco, config, ios, ftp, acl, (найти похожие документы) Первая (ciscoconf) копирует конфигурации конфигурацию по RSH и сохраняет в RCS. Если вам не хочется читать все, что написано ниже то рекомендую поставить. а, IOS-ы вобще разные бывают, у меня вот например к 3750G шла.
This document explains the step-by-step procedure to use the command-line interface (CLI) in order to upgrade the software image on Cisco Catalyst 3750 series switches that have a multiswitch stack configuration.